How Breaker Testing Can Give You Instant Peace Of Mind
Trust Quality Breaker Testing from Civic
When you’re purchasing reconditioned circuit breakers, whether it be for personal or business purposes, it’s important to know that they’re going to work exactly as advertised. At Civic Recycling, it’s not something we merely take for granted; it’s something that we take pride in and have the utmost confidence in. What’s more, every reconditioned circuit breaker comes with a written test report, to offer peace of mind. We’ll discuss this in greater depth in the subsequent text. Now, we understand that simply saying these things won’t convince you that our products are any better than anyone else’s, which works just fine as we have ample evidence to show you.
Reconditioned and Tested Circuit Breakers
At Civic, we put each and every reconditioned circuit breaker through a rigorous testing process that includes multiple stages. The first stages are a complete cleaning of the inside and outside, followed by a 36-point visual inspection of the interior and exterior of the breaker. Once things have been properly visually inspected and cleaned comes the actual breaker testing. Molded circuit breakers consist are three main parts: the insulation, the contacts, and the trip unit. Three different tests are required to test the three different components, which are outlined as follows:
#1 – Insulation Resistance:
This test is done to verify the condition of the breaker’s insulating materials. Testing is performed using an insulation resistance test set at 1KV. The results of this test are included in the test report we spoke about.
#2 – Contact Resistance:
The second test performed is done to verify the current path in the breaker. Loose or bad connections, dirty hinge points or contacts, and burnt contacts will all show up as a high resistance reading. Testing is performed on each phase individually using a digital low resistance ohmmeter at 10amps, results are measured in milliohms and recorded, again, in the test report.
#3 – Over Current Trip Test:
The third test is to verify the time-current characteristics of the breaker. Testing is performed with direct injection to simulate an overload current. We have assembled over 2000 manufacturer’s trip curves, and test each phase on every molded case circuit breaker to ensure that it trips according to the manufacturer’s very own factory specifications. These results too will end up in the test report.
Civic Recycling Test Reports
If you’re not well-versed in this type of language, what we’re saying is that each and every circuit breaker we recondition and sell goes through a battery of tests to ensure it will perform at the highest levels possible. Each reconditioned breaker also has a test report attached to it. What this report includes the detailed results of each breaker. It’s something of an insurance policy when purchasing breakers, as you know that the breaker has been put through the necessary paces to perform the way it should. The test report has a unique tracking number attached to it so that it’s always there to reference for you.
As a further insurance policy on each breaker, testing is performed only by Certified Low Voltage Circuit Breaker Technicians. Not only that, but each reconditioned breaker will meet or exceed the standards set out by NEMA, NETA, IEEE, as well as the manufacturer’s own testing standards. How’s that for awesome safety!
Our Breakers Just Work!
What all of this amounts to is that the breakers we sign off on are simply going to perform to the highest of specifications set out in the industry. Our breakers will work and not break. We stand behind the work we put into them and the products that we, in turn, sell to our customers.